top of page
Insulation attachment.
Fast. Clean. Finished appearance.
Victory Bear Track System
Insulation attachment.
- ENERGY EFFICIENT DESIGN - Flex-Tite technology seals tightly against the insulation board to reduce thermal loss at seams
- REDUCES COST - System is designed to withstand the impact of nail guns and saws, saving labor cost
- CONVENIENT FASTENING - All Flex-Tite and Quick Clip systems have fastening leg for easy access with nail gun
- CAN BE PAINTED - If custom color is required, Victory Bear joint cover can be primed and painted
Installation.
Step 1 - Align the Flex-Tite J-Channel horizontally at the desired height and check for level. Fasten into place.
Step 2 - Align the Flex-Tite female clip vertically at desired spacing and check for plumb. Nail 3/4" to 1" into place.
Step 3 - Install insulation and Flex-Tite male, then repeat.
Size | Female | Male | J-Channel |
|---|---|---|---|
*Custom | |||
4" | FTF-3 | FTM-14 | NA |
3.5" | FTF-3 | FTM-10 | NA |
3.2" | FTF-3 | FTM-06 | 1560 |
3" | FTF-3 | FTM-05 | 1547 |
2.75" | FTF-2 | FTM-13 | 1547* |
2.5" | FTF-2 | FTM-10 | 1153 |
2.3" | FTF-2 | FTM-09 | 1153* |
2.25" | FTF-2 | FTM-09 | 1541 |
2" | FTF-2 | FTM-05 | 1541 |
1.75" | FTF-1 | FTM-09 | 1541* |
1.5" | FTF-1 | FTM-06 | 769 |
1.25" | FTF-1 | FTM-03 | 751 |
1" | FTF-1 | FTM-03 | 1540 |
Tilt-Wall Videos
All Categories
bottom of page