Pick your application. Scroll for the wall attachment solution that's right for you.
CONTINUOUS RIGID INSULATION
RIGID
CONTINUOUS INSULATION
The only fasteners recommended, tested, or specified by all these manufacturers: Dow, Owens Corning, R-Max, Hunter, IKO, Carlisle, Atlas, Firestone, Kingspan, BASF.
PRODUCTS USED IN THIS APPLICATION
Thermal-Grip® ci Prong Washer
2" diameter washer used for attaching continuous rigid insulation (ci). Prongs enable pre-spotting into insulation (for fast on-the-wall fastener assembly).
Plasti-Grip® PMF Anchor
Attaches rigid continuous insulation to concrete / masonry substrates.
Plasti-Grip® ci Prong Washer
1-3/4" diameter, white washer with keyholes. Prongs enable pre-spotting into insulation for easy on-the-wall fastener assembly.
Pos-I-Tie® Veneer Anchoring System
Use with Thermal-Grip brick tie washers to attach rigid insulation including extruded polystyrene (XPS), polyisocyanurate (polyiso), expanded polystyrene (EPS), mineral/rock wool, etc.
Thermal-Grip® Brick-Tie Washer
2" diameter plastic washer used with barrel style brick tie for attaching continuous rigid insulation (ci). Prongs enable pre-spotting into insulation (for fast on-the-wall fastener assembly).
Grip-Lok® Hurricane Washer
3" diameter washer used to attach mineral wool.
Grip-Deck TubeSeal™
Helps seal blind fastener penetrations of your WRB and air-barrier.
Grip-Deck® Self-drilling Screws
Use with steel stud substrates.
Grip-Deck® HiLo Screws
Use with wood and light gauge metal substrates.
SIP Screws
Epoxy E-coating for corrosion resistance.
SIP TP - Thread point for wood & timber applications.
SIP LD - Light duty drill point for corrugated steel deck & steel studs (16-20 ga.).
SIP HD - Heavy duty drill point for structural steel (12 gauge or heavier).
Grip-Lok® Autofeed Fastening System
The Grip-Lok® Autofeed System allows for rapid attachment of insulation to steel or wood studs by quickly mating the Bullseye® adaptor to the head of our Thermal-Grip® ci washers.
